Pavel Imris: Optical Electrostatic Generator -- 900%
Efficiency

![](0logo.gif)  
**[rexresearch.com](../index.htm)**

---

**Pavel IMRIS**

**Optical Electrostatic Generator**

---

[**http://www.web-space.tv/free-energy/**](http://www.web-space.tv/free-energy/)

[**http://www.web-space.tv/free-energy/PART58.pdf?PHPSESSID=ebed96bc26dfefbe928bae7ed9ca800d**](http://www.web-space.tv/free-energy/PART58.pdf?PHPSESSID=ebed96bc26dfefbe928bae7ed9ca800d)

**Patrick Kelly's Notes**

Pavel Imris was awarded a US patent
in the 1970s. The patent is most interesting in that it
describes a device which can have an output pwer which is more
than nine times greater than the input power. He achieves this
with a device that has two pointed electrodes enclosed in a
quartz glass envelope which contains xenon gas under pressure
(the higher the pressure, the greater the gain of the device)
and a dielectric material...

The results from Test No. 24 where
the gas pressure is a very high 5,000 torr, that the input
power for each 40-watt standard fluorescent tubes is 0.9 watts
for full lmap poutput. In other words, each lamp is working to
its full specification on less than one-fortieth of its rated
input power. However, the power taken by the device in that
test was 333.4 watts which with the 90 watts needed to run the
100 lamps, gives a total input electrical power of 423.4 watts
instead of the 4,000 watts which would have been needed
without the device. that is an output power of more than nine
times the input power.

From the point of view of any
individual lamp, without using this device, it requires 40
watts of electrical input power to give 8.8 watts of light
output which is an efficiency of about 22% (the rest of the
input power being converted to heat). In test 24, the input
power per lamp is 0.9 watts for the 8.8 watts of light
produced, which is a lmap efficiency of more than 900%. the
lamp used to need 40 watts of input pwer to perform correctly.
With this device in the circuit, each lamp only needs 0.9
watts of input power which is only 2.25% of the original
power. Quite an impressive performance for so simple a device!

---

[**http://KeelyNet.com**](http://KeelyNet.com)

**Scalar Light Bulb**

From: Mark Jordan   
Date: Fri, 22 Jul 2005

You might also be interested in
knowing about the Imris' circuit (US Patent # 3,781,601).

 http://tinyurl.com/9fc9f

"An optical generator of an
electrostatic field at light frequencies for use in an
electrical circuit, said generator having a pair of spaced
apart electrodes in a gas-filled tube of quartz glass or
similar material with at least one condenser cap or plate
adjacent one electrode and a dielectric-filled container
enclosing the tube, the generator substantially increasing the
electrical efficiency of the electrical circuit. . . .

An optical electrostatic generator
which is effective for producing high frequencies in the
visible light range of about 10^14 to 10^23 Hz. . . .

The present optical electrostatic
generator does not perform in accordance with the accepted
norms and standards of ordinary electromagnetic frequencies.

The device can be used in a
flourescent lighting circuit, with motors, flash lamps, high
speed controls, laser beams, high energy pulses, electrostatic
particle precipitation, chemical synthesis (such as ozone
generation), and charging means for high voltage generators of
the VandeGraph type, as well as particle accelerators. . .

The device removes the component of
electricity which produces heat."

For flourescent lighting, Imris
shorted the pins on the ends of the tubes, indicating that the
filaments are not used, or necessary.

At higher pressures, the device
becomes Over Unity.  For instance, with a Xenon filled
tube at 5,000 torr in a series circuit with 100 40 Watt
flouresent lamps (with a single wire going to each end of each
lamp), the optical generator pulls 332 Watts, with each lamp
pulling 9 tenths Watt (at 5 Volts) for 3,200 lumens output
(8.8 Watts) per tube - giving a total for the circuit of 880
Watts output for 442 Watts input.

---

**US Patent # 3,781,601**   
**Canadian Patent # 951836**

**Optical Generator of an Electrostatic
Field having Longitudinal Oscillations at Light
Frequencies for Use in an Electrical Circuit**

**7-23-1974**

**Pavel IMRIS**

An optical generator of an
electrostatic field at light frequencies for use in an
electrical circuit, having generator having a pair of spaced
apart electrodes in a gas-filled tibe of quartz glass or
similar material with at least one condenser cap or plate
adjacent one electrode and a dielectric-filled container
enclosing the tube, the generator substantially increasing the
electrical efficiency of the electrical circuit.

The present optical electrostatic
generator does not perform in accordance with the accepted
norms and standards of ordinary electromagnetic frequencies.

The optical electrostatic generator
as utilized in the present invention can generate a wide range
of frequencies between several Hertz and those in the light
frequency. Accordingly, it is an object of the present
invention to provide improved electrical energy circuits
utilizing my optical electrostatic generator whereby the
output energy in the desired form will be substantially more
efficient than heretofore possible with standard circuit
techniques and equipment. It is a further object of the
present invention to provide such a circuit for use in
fluorescent lighting or other lighting circuits. It is also an
object of the present invention to provide a circuit for use
in fluorescent lighting or other lighting circuits. It is also
an object of the present invention to provide a circuit which
may be utilized in conjunction with electrostatic
precipitators for dust and particle collection and removal, as
well as many other purposes which will be apparent to those
skilled in the art as set forth hereinafter.

Figure 1 is a schematic layout
showing an optical electrostatic generator of the present
invention utilized in a lighting circuit for fluorescent
lamps;

![](ca951836-d1.gif)

Figure 2 is a schematic layout of a
high voltage circuit incorporating an optical electrostatic
generator; and

![](ca951836-d2.gif)

Figure 3 is a schematic sectional
view showing an optical electrostatic generator in accordance
with the present invention particularly for use in alternating
current circuits, although it may also be used in direct
current circuits.

![](ca951836-d3.gif)

**Description of the Illustrated
Embodiments**

Referring to the drawings and to
Figure 1 in particular, a low voltage circuit utilizing an
optical electrostatic generator in accordance with the present
invention is shown. As shown in Figure 1, a source of
alternating current electrical energy 10 is connected to a
lighting circuit. Connected to one tap of the power source 10
is a rectifier 12 for utilization when direct current is
required. The illustrated circuit is [provided with a switch
14 which may be opened or closed depending upon whether or not
direct or alternating current is desired. A switch 16 is
provided and closed when the circuit requires alternating
current, in which case switch 14 is open. When switch 16 is
open and 14 is closed, the circuit is operating as a direct
current circuit.

Extending from the switches 14 and
16 is a conductor 18 which is connected to an optical
electrostatic generator 20 in accordance with the present
invention. The conductor 18 is passed through an insulator 22
and connected to an electrode 24. Spaced from the electrode 24
is a second electrode 25. Enclosing the electrodes 24 and 25,
which preferably are of tungsten metal or similar materials,
is a quartz glass tube 26 which is filled with an ionizable
gas 28 such as xenon. The gas may be of any other suitable
ionizable gas such as argon, krypton, neon, nitrogen or
hydrogen, as well as the vapor of metals such as mercury or
sodium.

Surrounding each end of the tube 26
and adjacent to each electrode 24 and 25 are condenser plates
30 and 32 in the form of caps. A conductor is connected to
electrode 25 and passed through a second insulator 34.
Surrounding the tube, electrodes and condenser caps is a metal
envelope in the form of a thin sheet of copper or other metal
such as aluminum. The envelope 36 is spaced from the
conductors leading into and out of the generator by means of
the insulators 22 and 34. The envelope 36 is filled with a
dielectric material such as transformer oil, highly purified
distilled water, nitrobenzene or any other suitable liquid
dielectric. In addition, the dielectric may be a solid such as
ceramic material with relatively small molecules.

A conductor 40 is connected to
electrode 25, passed through insulator 34 and then connected
to a series of fluorescent lamps 42 which are arranged in
series connection. It is the lamps 42 which will be the
measure of the efficiency of the circuit containing the
optical electrostatic generator 20. A conductor 44 completes
the circuit from the fluorescent lamps to the tap of the
source of the electrical energy 10. In addition, the circuit
is connected to a ground 46 by means of another conductor 48.
The envelope 36 is also grounded by lead 50 and in the
illustrated diagram lead 50 is connected to the conductor 44.

The condenser caps or plates 30 and
32 form what will be called in this specification a relative
condenser with the discharge tube.

There is an oscillation effect
between the ionized gas in the discharge lamp and the metallic
envelope 36 forming what shall be called an absolute
condenser in this specification. The oscillation effect
between the ionized gas and the envelope 36 will be present if
the condenser caps are eliminated but the efficiency of the
electrostatic generator will substantially decreased.

The face of the electrode can be
any desired shape. However, a conical point of 60 degrees has
been found to be satisfactory and it is believed to have an
influence on the efficiency of the generator.

In addition, the type of gas
selected for use in the tube 26 as wall as the pressure of the
gas in the tube also effect the efficiency of the generator,
and, in turn, the efficiency of electrical circuit.

To demonstrate the increased
efficiency of an electrical circuit utilizing the optical
electrostatic generator of the present invention as well as
the relationship between gas pressure and electrical
efficiency, a circuit similar to that shown in Figure 1 may be
used with 100 standard 40 watt, cool-white fluorescent lamps
arranged in series. The optical electrostatic generator
includes a quartz glass tube filled in with xenon, with series
of different tubes being used because of the different
pressures tested.

Set forth in Table I is the data
obtained relating to the optical electrostatic generator. In
Table II the lamp performance and efficiency for each of the
tests set forth in Table I is shown. The following is a
description of the data set forth in each of the columns of
the Tables I and II.

*Column // Description*   
B // Gas used in discharge tube   
C // Gas pressure in tube in torrs   
D // Field strength across the tube measured in volts per cm
of length between the electrodes   
E // Current density measured in microamps per square mm of
tube cross sectional area   
F // Current measured in amps   
G // Power across the tube, calculated in watts per cm of
length between the electrodes   
H // Voltage per lamp, measured in volts   
K // Current measured in amps   
L // Resistance calculated   
M // Input power per lamp, calculated in watts   
N // Light output, measured in lumens

**Table I**

![](ca951836-2g.gif)

**Table II**

![](ca951836-2h.gif)

The design of the tube construction
for use in the optical electrostatic generator of the type
used in Figure 1 may be accomplished by means of considering
the radius of the tube, the length between the electrodes in
the tube and the power across the tube.

If we let R be the minimum inside
radius of the tube in centimeters, L the minimum length in
centimeters between the electrodes, and W the power in watts
across the lamp the following formula may be obtained from
Table I:

R =  Current [A] / Current
Density [ A / mm^2 ] / 3.14

L = 8R

W = L ( V / cm ) A

For example. For Test No. 18 in
Table I, the current is 0.1818 A (column F), the current
density 0.000353 A/mm^2 (column E), and the voltage
distribution is 122.8 V/cm (column D); therefore

R = 0.1818A / 0.000353 A/mm^2 /
3.14

L = ( 12.80 mm ) ( 8 ) = 102.4 mm
or 10.2 cm

W = ( 10.2 cm ) (122.8 V/cm ) (
0.1818 A ) = 227.7 VA or 227.7 Watts

The percent efficiency of operation
of the fluorescent lamps in Test No. 18 can be calculated from
the following equation:

% Eff. = ( Output Energy ) / (
Input Energy ) x ( 100 )

Across a single fluorescent lamp,
the voltage is 60 V and the current is 0.1818 A; therefore,
the input energy to the lamp 42 is 10.90 W. The output of the
fluorescent lamp is 3,200 lumens which represent 8.8 W power
of light energy. Thus, one fluorescent lamp is operating
at  80.7% efficiency under these conditions.

However, when the optical generator
is the same as described for Test No. 18 and there are 100
fluorescent lamps in series in the circuit, the total power
input is 227.7 watts for the optical electrostatic generator
and 1.000 watts for 100 fluorescent lamps or a total of 1,318
watts. The total power input normally to operate the 100
fluorescent lamps in a normal circuit would be 40 watts tie
100 or 4,000 watts. Thus, by using the optical generator in
the circuit, about 2,680 watts of energy are saved.

Table I is an example of the
functioning of this invention for a particular fluorescent
lamp ( 40 watt, cool-white ), however, similar data can be
obtained for other lighting applications by those skilled in
the art.

In Figure II a circuit is shown
using an optical electrostatic generator 20a similar to
generator 20 of Figure 1. In generator 20 only one condenser
cap 32a is used and it is preferably of triangular
cross-sectional design. In addition, the second electrode 25a
is connected directly by a conductor back into the return
conductor 52.

This arrangement is preferably for
very high voltage circuits and the generator is particularly
suited for direct current usage.

In Figure 2, common elements have
received the same number indicators as in Figure 1.

In Figure 3, still another
embodiment of an optical electrostatic generator 20b is shown.
This generator is particularly suited for use with alternating
current circuits. In this embodiment the condenser plates 30b
and 32b have flanges 54 and 56 extending outwardly towards the
envelope 36. While the utilization of the optical
electrostatic generator has been described in use in a
fluorescent lighting circuit, it is to be understood that many
other types of circuits may be used. For example, the high
voltage embodiment may be useable in a variety of circuits
such as flash lamps, high speed controls, laser beams, and
high energy pulses. The generator is also particularly useable
in a circuit including electrostatic particle precipitation in
air pollution control devices, chemical synthesis in
electrical discharge systems such as ozone generators, and
charging means for high voltage generators of the Van de Graff
type, as well as particle accelerators.

To those skilled in the art many
other uses and circuits will be apparent.

---

**Pavel Imris' Patents**

HIGH FREQUENCY GENERATOR AND METHOD
OF USING RADIATION OF ENERGY FROM EXCITED AND METASTABLE ATOMS
OF A PLASMA   
CA980880   
1975-12-30

ELECTRIC GENERATOR HAVING HELICAL
FERROMAGNETIC BAND ON THE ROTOR SURFACE   
CA954924   
1974-09-17

OPTICAL GENERATOR OF AN
ELECTROSTATIC FIELD HAVING LONGITUDINAL OSCILLATIONS AT LIGHT
FREQUENCIES FOR USE IN AN ELECTRICAL CIRCUIT   
CA951836   
1974-07-23

METHOD AND DEVICE FOR THE
DESALINATION OF IN PARTICULAR SEAWATER WITH THE AID OF
ALTERNATING FIELDS OF IDENTICAL FREQUENCIES   
WO2006039873   
2006-04-20

Electric motor   
EP1489722   
2004-12-22

Compressed air motor   
DE10311773   
2004-09-30

Transformer with capacitive
resistor for operating with high inductivity consists of a
low-retentivity magnet core with primary and secondary
windings fitted around it.   
DE19927355   
2000-12-21

Pendulum with magnetic drive driven
by changing direction of magnetic flow between two permanent
magnets and two ferrous disks   
DE19915787   
2000-10-12

Apparatus to create electrical
energy from low temperture heat   
EP0943789   
1999-09-22

Einrichtung zur Umwandlung von
Niedertemperaturwarme in elektrische Energie   
DE59910874D   
2004-11-25

DEVICE FOR TRANSFORMATION OF ENERGY
LOCATED IN MAGNETIC FIELD TO KINETIC ENERGY   
SK89594   
1995-05-10

DEVICE FOR CONVERSION OF MAGNETIC
FIELD ENERGY TO KINETIC ENERGY   
CZ9401781   
1995-03-15

Flywheel with adjustable mass
inertia torque - has flywheel arm on rotor shaft with
circulating mass fitted to flywheel at distance from rotor   
DE4114870   
1992-04-30

LAMP WITH LIGHTING COATING   
HU53731   
1990-11-28

LEUCHTSTOFFLAMPE   
DE59000175D   
1992-07-30

LEUCHTSTOFFLAMPE   
AT77712T   
1992-07-15

Method and device for measuring the
conversion of kinetic into potential energy and vice versa   
DE3837723   
1990-05-10

Rim, in particular for the wheels
of passenger cars   
DE3715266   
1988-11-24

Wind turbine   
DE3715265   
1988-11-24

Anti-skid device   
DE3715264   
1988-11-24

Method and device for producing
(generating) electromagnetic pulses   
DE3706385   
1988-09-08

Apparatus for producing and
controlling harmonic pulses   
DE3503411   
1986-08-07

Appliance for the controlled
generation of gas pressure waves   
DE3425068   
1986-02-06

Device for producing and
controlling oscillations   
DE3407798   
1985-09-12

Device for generating and
controlling beats   
DE3339074   
1985-05-15

Device for generating or
controlling damped oscillations   
DE3331058   
1985-03-14

Method and device for producing
electrical discharges   
GB2122026   
1984-01-04

Device for generating and
controlling circularly polarised oscillations   
DE3247649   
1984-06-28

Device for producing or controlling
oscillations   
DE3228899   
1984-04-05

Device for generating and
controlling non-harmonic oscillations   
DE3139983   
1983-04-28

APPARATUS FOR THE PRODUCTION OF
OZONE   
NO781847   
1978-11-29

Device for the production of ozone
  
US4152603   
1979-05-01

Appts. for prodn. of ozone from air
or oxygen   
DE2724428   
1978-11-30

DISPOSITIF POUR LA PRODUCTION
D'OZONE   
NO763033   
1977-03-08

GENERATRICE ELECTRIQUE   
FI49230B   
1974-12-31

VERFAHREN UND VORRICHTUNG ZUR
ERZEUGUNG VON HOCHFREQUENZIMPULSEN   
DE2218592   
1973-10-18

No English title available   
DE2165249   
1973-02-15

Electrostatic precipitator - uses
plasma of metastable ions to achieve high precipitation   
DE2151220   
1973-04-19

Purification of a gas stream   
DE1940642   
1970-10-01

---